Tainet IPBX 230, User Manual

Page: 107 / 107

Chapter 6 Example Provisioning
105
Create an additional user account named public and assign it to usergroup
utility.
Create a device for each physical phone and designate an extension.
Assign extensions of staff phones to corresponding users.
Assign all extensions of utility phones to share the same user, public.
Create a route, pstn, with pattern “9Z.” with number of digits stripped “1”, no
prefix.
Create a route, pstn-hq, with pattern “9001408.” with number of digits stripped
“7”, prefix “9”.
Create a route, ext-hq, with pattern “1XX” and number of digits stripped “0”,
no prefix.
Create a routegroup, pstn-out, containing route pstn only.
Create a routegroup, to-hq, containing routes pstn-hq and ext-hq.
Create a PSTN trunk with ID 1, port 1-2, choose pstn-out as outbound
routegroup, do not select any DID of extension, and select ext-all as the
usergroup of privilege.
Create a SIP trunk with ID 100 pointing to 64.1.0.1 port 5060; password
hq-secret; choose to-hq as outbound routegroup, do not select DID, and
select staff as the usergroup of privilege.
Return to usergroup configuration. For usergroup staff, select 100, pstnl in
Associated Trunks and select utility in Reachable User Group; while for
usergroup utility, only select staff in Reachable User Group.
Reload the IP PBX Service.