Tainet IPBX 230 User Manual Download

Page: 64 / 107

Chapter 4

IP PBX Configuration

4.6

SIP Trunk Configuration

A SIP trunk refers to a SIP account on a remote call routing or gateway device. A

practical example is an account at an Internet Telephony Service Provider (ITSP)

where a call is routed to a SIP client or off-ramped to an analog subscriber via

PSTN. One could also build SIP trunk to a remote IP PBX to reach its extensions

and PSTN ports.

The SIP TRUNK MANAGEMENT page allows the administrator to configure SIP

trunks used by TAINET IPBX 230. Select Trunk -> SIP Trunk, and one can add,

edit, and delete SIP trunks. Go to Service -> IP PBX Service, and click RELOAD to

activate changes.

4.6.1

Add a SIP Trunk

Click the

Add New

tab.

Enter settings shown in Table 4.6-1.

Click

ADD

The newly added SIP trunk shall be displayed in Trunk Identifier.

4.6.2

Edit a SIP Trunk

Click the Trunks tab, and More to see more information.

Edit settings shown in 4.6-2 in a row.

Click APPLY in the row to update the information.

4.6.3

Delete a SIP Trunk

Click the Trucks tab, and select a trunk identifier.

Click DEL.

The deleted SIP trunk shall disappear from the Trunk Identifier.

Summary of Contents for IPBX 230












































































































Search results

Summary of Contents for IPBX 230

Reviews:

Related manuals for IPBX 230

Brands by name

Popular brands

Tainet IPBX 230, User Manual

Search results

Summary of Contents for IPBX 230

Reviews:

Related manuals for IPBX 230

Brands by name

Popular brands