Tainet IPBX 230, User Manual

Page: 101 / 107

Chapter 6 Example Provisioning
99
Chapter 6. Example Provisioning
This chapter introduces several practical configuration examples of TAINET IPBX 230
deployment. The configuration of TAINET IPBX 230 is very flexible and the expressiveness of
usergroups, routegroups and trunks are scalable enough to support various network
architectures. Users could refer to these examples and build a larger network involving
multiple sites and advanced services.
6.1 Internal Extension Configuration
The procedure introduced below is recommended as the first step of a
configuration task. The configuration only enables internal extension calls, but it
serves as a good practice for administration. User can fllow the steps asFigure
6-1.
Configure a usergroup named ALL (refer to 4.2).
Configure users and assign every user to usergroup ALL (refer to 4.1).
Configure devices and an extension for each device (refer to 4.3).
Assign each extension to a corresponding user (refer to 4.3).
Configure each client phone with respect to the extension number and
password in its IP PBX extension configuration accordingly.
Reload the IP PBX service (refer to 3.5.2).
Up to this point all configured phones should register with the IP PBX with a usable
extension. Since these phones are all belonged to the same usergroup ALL, they
can call one another without limitation.