Chapter 2 System Configuration
2.4
On-board LAN Setup
The LAN Setup page allows administrator to configure LAN network interface for
TAINET IPBX 230.
Select
System -> On-board LAN Setup
to see the current settings of LAN
network interface.
Enter a new IP address and network mask.
Click
APPLY
to change the settings.
Figure 2-5 On-board LAN Setup
23
Note:
By default TAINET IPBX 230 grants IP addresses to LAN devices via
DHCP, and translates those addresses into its WAN IP address for
access beyond the LAN subnet. As a result, modifying the system
LAN IP subnet must also change DHCP pool and LAN routing (if
any) accordingly, and restart the IP PBX Service.
Summary of Contents for IPBX 230
