Taiden HCS-8600 Series, Installation And Operating Manual

Page: 32 / 184

6. Audio Mode
set audio mode for main unit, normal mode,
teleconferencing mode or external process mode
optional.

Normal mode:
all input sources can be output
through all the output channels
;

Teleconferencing mode:
the input source Line In 1
cannot be output through Line/AES Out1 and can
be output normally through other output channels
;

External process mode:
Line In 1 input source can
be output through down-stream audio channel,
other input sources can be output normally
through 26 output channels
;
a). Rotate the function knob to select the sub menu;
b). Press the function knob to enter audio mode setting
interface;
c). Rotate function knob to select audio mode;
d). Press the function knob to save and return to upper
level menu.
7. Time Setting
Set system clock.
a). Rotate the function knob to select the sub menu;
b). Press the function knob to enter current time setting
interface;
c). Rotate function knob to go to “Year”, “Month”, “Day”,
“Hour”, “Minute” "Second" in turn;
d). Press the function knob to set time (at this time, the
time item number bold display);
e). Rotate the function knob to adjust the value;
f). Press the function knob to save the value;
g). Repeat steps c)~f) and set the other time items in
turn;
h). Rotate the function knob to "Return" and press the
function knob to return to upper level menu.
8. Network Setting
“Network” includes submenus:
“IP Address”
“Subnet Mask”
“Gateway”
“DHCP”
“Return”
a). Setting up unique “IP Address” for the
transmitter:
a). Select “IP Address” and press the function knob to
go to setup IP address interface;
b). Rotate function knob to switch between the four
numbers;
c). Press the function knob to set number (at this time,
the number bold display);
d). Rotate the function knob to adjust the value;
e). Press the function knob to save the value;
f). Repeat steps b)~e) and set the other numbers;
g). Rotate the function knob to "Return" and press the
function knob to return to upper level menu.
b). Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP Address” set up.
C). DHCP
Same chronological order as for “IP Address” set up.
a). Select “DHCP” and press the function knob to go to
setup DHCP interface;
21