Taiden HCS-8600 Series, Installation And Operating Manual

Page: 94 / 184

microphone number limitation. If the number of
active microphone (including chairman and VIP
unit) reaches 8, turning on another microphone will
switch off the delegate microphone turned on first.
C. “Voice” mode

Active microphone number limitation (1~8) NOT
reached :
a. The microphone On/Off key indicating light
remains on. When the delegate speaks into the
microphone at a short distance, the microphone
will be activated;
b. If the delegate does not speak for several
seconds, the microphone will be deactivated
automatically. The interval time can be adjusted
at the main unit (refer to section 2.1.3 );
c. When the microphone is activated, it can be
turned off by pressing the microphone On/Off
key.

Active microphone number limitation (1~8)
reached :
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “Request” mode
a. Request to speak when the microphone On/Off
key is pressed (default 8 microphones at most).
The chairman unit can approve or reject his/her
speak;
b. When his/her request is approved, he/she can
speak and the last activated microphone will be
turn off at the same time.
E. “PTT” mode

Active microphone number limitation (1~8) NOT
reached:
a. The microphone will be activated when the
microphone On/Off key is pressed and held, the
speaker can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is released.

Active microphone number limitation (1~8)
reached :
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting
Voting can be originated by TAIDEN conference
management system software.

The voting button indicating lights of the congress
unit start to blink; the delegate can press the voting
button to vote;

For “First key-press valid” voting, the delegate can
vote only once;

For “Last key-press valid” voting, the delegate can
change his/her vote, and the last voted key will be
valid.
5. Channel selection

When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the delegate can
select a suitable language to listen to by means of
the channel selector.
6. Volume control

The volume of the built-in loudspeaker can be
adjusted by the master volume control knob on the
main unit;

When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit.
Note:

The active microphone number limitation is 1~8,
it is valid for the delegate units; including the
chairman and VIP units, the maximum number
of active microphones available for the system is
8.
83