Taiden HCS-8600 Series, Installation And Operating Manual

Page: 134 / 184

6.1.3.5 About Dante
Display Dante information, including device name, Dante
version and device version. Press the function button to
return to the upper level menu.
6.1.3.6 Screensaver
Enable or disable screensaver for HCS-8600MIO.
1) Select “Screensaver” and press the function knob to
go to screensaver setup interface;
2) Rotate function knob to Enable/Disable screensaver,
if enable screensaver, the menu is not operated for a
period of time, the LCD screen will dim and enter the
protection state;
3) Press the function knob to save and return to the
upper level menu.
6.1.3.7 Power Mode
It is used to set the power mode of the HCS-8600MIO
audio input & output device. The setting will take effect
after restarting the machine, including:
"Sync": power on/off synchronously with the CMU;
"Async": power on/off independently.
1) Select “Power Mode” and press the function knob to
go to power mode setup interface;
2) Rotate function knob to select power mode;

"Sync": power on/off synchronously with the CMU;

"Async": power on/off independently;
3) Press the function knob to save and return to the
upper level menu.
6.1.3.8 About
Display the information of the HCS-8600MIO audio input
& output device, including software version, serial
number. Press the function knob to return to the upper
level menu.
6.1.3.9 Return
Select this item and press the function knob to return to
the LCD initial interface.
Note:

When the power mode is changed, it will take
effect after restarting the device.
123