Taiden HCS-8600 Series, Installation And Operating Manual

Page: 131 / 184

6.1.2 Connection
HCS-8600MIO converts the digital audio signals of the
congress system to multi channel audio signals, for
further processing in infrared simultaneous interpretation
systems or recording devices. The audio signal from the
HCS-8600M CMU can be provided to the HCS-5100
digital infrared language distribution system, converted
into an infrared signal and radiated. With digital infrared
receivers, the participators can hear the voice clearly.
1. HCS-8600MIO can be connected to HCS-8600M CMU
in two ways (only one of them can be used at one
time):
♦
Connect the "EXTENSION" interface of the
HCS-8600 CMU to the "EXTENSION " interface of
the HCS-8600MIO with a Cat. 5 cable.
♦
Connect the fiber port of the HCS-8600M to the
fiber port of the HCS-8600MIO with optical cable.
2. Audio cables are required to connect the "AUDIO
OUTPUT" analog audio output interfaces of
HCS-8600MIO to the "AUDIO INPUT" audio input
interfaces of the HCS-5100M series main unit one by
one. HCS-8600MIO can be cascaded if more channels
are needed.
3. The digital infrared transmitter is connected to the first
radiator by a 75 Ohm coaxial cable. Connect one BNC
plug of the coaxial cable to the “HF OUT” port of the
HCS-5100MC/F and the other BNC plug to the
“MODULATION IN” port of the 1st radiator. When
connecting to the 2nd radiator, connect the
“MODULATION OUT” port of the 1st radiator to the
“MODULATION IN” port of the 2nd radiator with a
coaxial cable. Up to 30 daisy-chained radiators can be
operated from each socket (6 sockets per transmitter) .
Figure 6.1.3 CMU connecting to infrared language distribution system via HCS-8600MIO
120