Taiden HCS-8600 Series, Installation And Operating Manual

Page: 42 / 184

Main Unit Parameters:

Disconnect PC and allow chairman to control Request: when PC disconnected, chairman unit can approve/overrule
delegates request;

Use Extension Port: select whether use extension port or not;

Use Fiber Port: select whether use fiber port or not;

When abnormally disconnected, switch from Request mode to Open mode;

Allow Video Tracking: allow video tracking automatically when the microphone is on;

Video Track Mode: set video track mode as FIFO, VIP First or Voice when video tracking;

MU Name: set up main unit’s name;

Main Unit Time Setting: setup the time displayed on the LCD of the main unit’s front panel;
♦
Current Time: display the time of the DCS server;
♦
Reading: read the time of the main unit;
♦
Setup: set the time of the main unit according to the time of the DCS server;

Voice Parameter:
♦
Voice Sensitivity Level: set the sensitivity “Level” to open microphone in Voice mode;
♦
Auto stop time in voice mode: set the sensitivity “Off Time” to close microphone in Voice mode;

MU Parameters Backup: upload and download main unit’s parameters, used for parameters backup and restore;

System Parameters: display system parameters, including device model, version, etc.

Dante Parameters: display dante information.
Microphone Parameters:

DCS Units Display Real Time: select whether the contribution units display real time or not;

Lock unit Language: if locked, delegate cannot change unit's operation language;

Reduce headphone Vol. when mic. active: select whether reduce headphone volume or not when Mic. active;

Headset Plugged in with a Mute Speaker

Handheld Mic. PTT Mode: force handheld microphone to PTT mode;

Hands Up Key Use As Microphone Key: hands-up key is used as microphone On/Off key except discussion mode;

Ring Mode: turn on/off all ring tones of the conference units when requesting to speak, on receipt of a short
message or on IC card insertion;

Touch Button Beep: enable beep function for touch button, if enabled, when press touch button, the unit’s
speaker/headset gives a prompt beep sound;

Chairman Priority Mode: set the operation when the chairman unit presses the priority button;
♦
All Off: turn off all microphones of delegates (except VIP units and other chairman units);
♦
All Mute: mute all microphones of delegates (except VIP units and other chairman units) temporarily; once the
button released, the former state is restored;
♦
Disabled: disable chairman unit’s priority function. If disabled, the function of the priority key is the same as the
Mic. On/Off key.

Turn on and set microphone LED:
♦
Status: Off, On and Flash for selection;
♦
Mic. Light: Red, Green and Yellow (check both red and yellow) for selection;

Max. Request Count:
set up the maximum number (≤100) of request microphones;

Set DDS Unit as Single ID Mode or Double ID Mode.
31