auto tune level
(FM/
A
M only)
calibration tone
(FM/
A
M only)
limit dynamic
range
(D
A
B only)
find ensembles
(2)
(D
A
B only)
alt freq select
(FM only)
factory defaults
Sets the level at which the auto tune system will stop at a given
frequency.
low sensitivity
= only include strong signal stations
medium sensitivity
= include strong and medium stations
high sensitivity
= include strong, medium and weak
stations
(1)
system
Turns on the 400 Hz calibration tone at -6dB, to allow recording
levels to be set. For further details see page 49.
Limit dynamic range reduces the volume of very loud passages
and increases the volume of very quiet passages. We recommend
to leave this feature switched
off
.
Scans all available DAB bands to find stations. This function can
also be accessed by pressing and holding the
dab
button or key.
Searches for the same station being transmitted on another
frequency at a higher signal level. This function is only available
for FM RDS stations which are part of the EON network. Press
enter
when ‘search’ is shown to start search.
Return unit to the configuration it had when it left the factory. This
does not affect pre-set station memories.
41
menu functions
1. There may still be stations which are too weak to be selected automatically - you
will find them when tuning very carefully using the manual tuning knob
2. An ensemble is a group of digital programmes usually transmitted by one
broadcaster. The T32R splits this ensemble into individual programmes for
convenience
*LASER*-T32R Manual v3.7x 8/29/02 12:14 PM Page 41
