recalling
stations
memory
To recall a station stored in memory, press a number button on the
front panel for memories
1
to
9
or both digits for memories 10 to
99. If you select digits
1
to
9
only, the T32R will wait a few
seconds before the stored station is selected
.
For faster station
access precede
1
to
9
with
0
.
You can also step through the stored stations by pressing the
s
or
station -
keys on the Remote. This will start from the
current stored number if a stored station is selected; if in manual
tuning, pressing
s
or
-
will go to the next/previous stored
station from the last one selected.
The memory location number is shown on the left of the display.
When you use manual, scan or direct input tuning, the memory
location number display is turned off, and the selected band is
displayed instead
(1)
.
The T32R remembers all its settings, including pre-set stations,
even if unplugged from the AC supply. It will return to its last
setting when it is switched back on.
24
storing/recalling stations
1. If you select a station using scan or direct input tuning, which is already stored
in one of the memory allocations, then the radio memory indicator will show the
number of the associated memory, e.g. M11 settings associated with the memory
allocation, e.g. if bandwidth etc. will not be selected
S T A T I O N
1
4
7
2
5
8
3
6
9
0
store
D I R E C T I N P U T
1
2
abc
def
jkl
ghi
mno
tuv
pqrs
wxyz
3
station
0
7
8
store
snooze
9
frequency
input
4
5
6
wake up
station
---
+
*LASER*-T32R Manual v3.7x 8/29/02 12:14 PM Page 24
