display
To simplify the appearance of the display, parts of it can be turned on and off. All ticked items
will be displayed.
icons
= information icons; rds, mono, etc
band
= FM, MW, LW, DAB indicator
centre text = large dot burst display information
lower text = dot matrix display information
To ‘tick’ an ‘unticked’ item, simply select it and press
enter
or wait for a few seconds whilst the
T32R ‘ticks’ the item for you. If you press
menu
or
enter
again, the menu is left storing your
change. To ‘untick’ a ticked item, select it and the T32R will ’untick’ it for you. This will take
just a few seconds.
There are four brightness levels,
high, mid, low
and
off
. You can switch between those levels
using the
display
key/button.
The brightness levels associated with
high, mid
and
low
can be configured, using this scale: 1
light bulb (dark) to 10 light bulbs (very light).
This is the brightness the T32R selects when being switched on. You can select
low, mid
or
high
.
The display can be configured to switch to the
after hold time brightness
after the
hold time
has expired, which can be set to 1, 2, 3, 5, 10, 20, 30 or 60 seconds. In this mode the
display will switch automatically to the original brightness level, if the display content changes.
You can select
high, mid, low
or
off
.
complexity
brightness levels
power up
brightness
hold time
after hold
brightness
38
menu functions
*LASER*-T32R Manual v3.7x 8/29/02 12:14 PM Page 38
