tuning methods
fm antenna
selection
scan tuning
The T32R has two antenna inputs for FM antennae
(1)
. Press the
MODE antenna
button on the front panel or the
antenna
key on
the T32R Remote to toggle between the two FM antenna inputs.
Pressing the
fm
button on the front panel or the
fm
key on
Remote, will also toggle between the two FM antennae. The
currently selected antenna will be shown as part of the source
indicator at the top left of the display, i.e.
FM1
indicates that the
antenna connected to
FM ANTENNA antenna 1
has been
selected, and
FM2
indicates that the antenna connected to
FM ANTENNA cable 2
has been selected.
Press the
TUNE next
button once on the front panel or the
key once on the T32R Remote to go up in frequency to the next
available station signal or the
TUNE previous
button (
tuning -
key
on the T32R Remote) to go down
(2)
.
When scan tuning reaches either end of the tuning range, it
wraps around and starts again at the other end of the scale. In
FM, whilst scanning for the next station, the fm tuning indicator
(see page 25 for details) will be shown, together with the
frequency.
19
1. Both antenna inputs are electrically identical
2. DAB Digital Radio stations are not broadcast at discrete frquencies and are
listed in alphabetic order along a ‘virtual’ frquency band
M O D E
antenna
info
display
data
---
---
---
M A I N
---
+
standby
fm
mute
muting
program
antenna
display
tuner select
mw
mono
data
lw
if width
traffic
dab
hi-blend
info
station
---
+
tuning
volume
---
+
T U N E
next
previous
---
+
tuning
*LASER*-T32R Manual v3.7x 8/29/02 12:14 PM Page 19
