getting started
14
disconnect from
power
antenna
connection
amplifier
connection
Check that the power button is out so that the power is off
(1)
. Pull
the power cord out of your T32R.
Please make sure that all components of your complete hi-fi
system are switched off and disconnected from the power.
Connect an FM antenna to the socket marked
FM ANTENNA 1
on
the rear of your T32R
(2)
. If you also want to listen to AM
broadcasts, connect the AM loop antenna supplied to the screw
terminals marked
AM ANTENNA am loop
(3)
. If your T32R tuner
has the optional DAB module fitted, connect a DAB antenna to
the socket marked
DAB MODULE DAB antenna
(4)
.
Use a good quality, screened phono-phono audio cable (such as
our Cable AvantGarde RCA-RCA analog interconnect) to connect
the phono sockets marked
AUDIO OUTPUT left
and
right
on the
rear of your T32R to the corresponding tuner inputs of your
preamplifier. Make sure that the left and right channels are
connected correctly.
Make sure your preamplifier’s volume is turned down and the
tuner input is selected.
1. The power button is a latching switch. One press will hold it in; the next will
release it
2. The connection of both FM antenna sockets is described in detail on page 44
3. The assembly and connection of the AM loop antenna is described in detail on
page 45
4. Details can be found onpage 46
antenna
cable
1
2
75 ohm
F M
A N T E N N A
DAB antenna
50 ohm
A U D I O
O U T P U T
left
right
*LASER*-T32R Manual v3.7x 8/29/02 12:13 PM Page 14
