background image

54

Coral IPx and FlexiCom Registration 

Coral FlexSet-IP 280S Installation Manual

Coral FlexSet-IP 280S Installation Manua

l

6

Parameters Specified for Each Phone

The following parameters are used to assign information specific to each 

FlexSet-IP 280S on a per port basis.

Port List ..........................................................................(Route: PLIS,0)

Each FlexSet-IP 280S may be assigned a port name. Two versions of the port name 

may be entered for each phone. Up to five characters may be entered in the short field. 

The short name is displayed on FlexSet 120D/120S station sets that place or receive 

calls to or from this FlexSet-IP 280S. The full field may contain names up to 16 

characters in length, and is displayed on keysets with displays of 80 or more 

characters. 

Keyset Definition.............................................................(Route: KEY)

An operating profile for each FlexSet-IP 280S is defined in the Keyset Definition 

branch. This profile assigns the phone two COS levels that can be imposed during 

specified day and night service periods. The profile also determines whether certain 

features permitted by the station’s COS are currently enabled.

DND_WP [12]

: Whisper pages cannot be received by an IP keyset.

Set this parameter to 

Yes

 to enable the user to prevent whisper pages.

VOICE_MAIL (dtmf receive) [24]

: Set this parameter to 

No

.

MUSIC [29]

: Background music is currently not supported for IP keysets.

PCC [38]

ACD_PC [39]

: These features are not relevant for IP keysets.

SOFTKEY [41]

: Defines the phone to support soft keys. Set this parameter to 

Yes

 (default).

Feature Control...............................................................(Route: FEAT)

Determines whether certain features are currently activated or inactivated.

Station COS....................................................................(Route: COS,0)

Calling and feature privileges are determined by the Class Of Service to which each 

phone is assigned. The Coral supports up to 250 distinct COS, which comprise calling 

privileges, features access, etc.

User Compression List [92]

Define the available compressions used for IP calls, in order of preference, for this 

COS. Matching compression values must be found in the COSs of both calling parties 

in order to complete the IP call.

Summary of Contents for Coral FlexiCom CoraliPx FlexSet-IP 280S



































































































Reviews: