Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Installation Manual

Page: 31 / 98

Coral FlexSet-IP 280S Installation Manual Phone Hardware Description 23
Coral FlexSet-IP 280S Installation Manual
4
................................................................................................................

Connecting the Network (LAN / PC)
One Internal Switch for PC and FlexSet-IP 280S
One RJ-45 LAN Ethernet socket is sufficient for both the PC connection and the
telephone.
Two connector outlets are located on the bottom of the FlexSet-IP 280S, see Figure 5 .
These connectors create an internal bridge for both the IP telephone and the computer.
Figure 5 FlexSet-IP 280S
Bottom, Rear and Side
View
As shown in Figure 6 , the phone is connected to the LAN wall connector with the
RJ-45 cable provided, using the LAN (DTE) connector on the bottom side of the
phone. The phone is connected to the PC with an RJ-45 cable, using the PC (DCE)
connector on the bottom of the phone. The communication protocol for both LAN and
PC is 10/100Mbps, half, full or auto duplex. The recommended setup is 100Mbps,
auto duplex.
Rear view
Bottom view
RJ-45 jack to PC
(or next FlexSet-IP 280S)
RJ-45 jack to LAN
(or previous FlexSet-IP 280S)
Left side view
DC
Power Supply
(24 to 36 VDC)
#1
Handset
Connection #2
Headset
Connection
LAN PC
+
-