Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Installation Manual

Page: 74 / 98

66 Configuring the Phone via its Keypad Coral FlexSet-IP 280S Installation Manual
Coral FlexSet-IP 280S Installation Manua
l
7
................................................................................................................

Adjusting the Local Time Zone
To set the time zone of the FlexSet-IP 280S:
1
On the phone, press the key.
2
Press
[SysDef]
and enter the password (default = 159753) at the prompt.
3
Using the navigation keys, select
IP Params > Static > Time Zone
(see Figure 10 on page 60 ).
To view the granted Time Zone for this FlexSet, select
IP Params > Current> Time Zone
.
4
Press the right navigation key and then
[Edit]
to adjust the local time zone of
the FlexSet-IP 280S. There are three options:
[Sign]
Used to toggle b and - (GMT).
[Auto]
Used to request the time zone definition from the DHCP server. Any
numbers that were entered are erased and changed to dashes and
(Auto Detect)
is displayed next to the dashes.
[Save]
To save the new time zone offset.
5
Begin entering the required time offset at the flashing box using the dial pad,
as follows:
 Ensure the time offset is entered in +/- HH:MM format (HH=Hours: 0..12,
MM=number of minutes).
 Entering an hour greater than 12 is ignored.

The minutes are rounded up to the nearest 15 minute interval: 00, 15, 30,
or 45.
6
Press
[Save]
to save your changes.
The time display is adjusted after the IP phone is initialized.
SysDef:IP Params:Static:Time Zone
GMT: +--:--
sign auto save