Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Installation Manual

Page: 57 / 98

Coral FlexSet-IP 280S Installation Manual Coral IPx and FlexiCom Registration 49
Coral FlexSet-IP 280S Installation Manual
6
6
Coral IPx and FlexiCom Registration
................................................................................................................

Overview and Minimum Requirements
This section provides a general description of the phone registration process and the
Program Interface (PI) parameters that need to be programmed into the Coral
FlexiCom and Coral IPx systems. Programming these parameters must be performed
to enable the phone to dial, make, and accept calls.
Before configuring the PI database, verify that Coral Software Version 14 or higher
has been installed on the Coral system.
Actual Coral system programming procedures in the PI are beyond the
scope of this manual. To learn about PI procedures and phone feature
programming, refer to the Coral Program Interface and Database
Reference Manual.
This chapter does not include general IP parameters that must be configured
within the Coral system in order for it to enable basic IP functionality. For an
outline of general IP parameters, refer to the Coral Voice over IP
Installation Manual.
See
Related Documentation, page 3
.
Preparing for Programming
Before programming the PI, enter the Port List, MAC address, and IP address in
Table 3 on page 15 . Keep this list handy for updating phone numbers and names.