Tadiran Telecom Coral FlexiCom CoraliPx FlexSet-IP 280S, Installation Manual

Page: 58 / 98

50 Coral IPx and FlexiCom Registration Coral FlexSet-IP 280S Installation Manual
Coral FlexSet-IP 280S Installation Manua
l
6
................................................................................................................

PI Parameters for Reference
The parameters in this section indicate that the product is authorized to
operate in the Coral system along with the number of phones. They must be
verified and recorded before programming other PI parameters or initializing
the phone.
Feature Authorization .....................................................(Route: FEAT, 1)
These display-only parameters display the maximum number of phones that are
authorized for use with this Coral system. If the number of phones to be installed
exceeds the number authorized, contact your manufacturer’s representative to increase
the number of authorized phones in the system.

PORTS

MEDIA_CHAN

KEYSETS_IP (FlexSet-IP 280S, and Sentinel
I/II/Terminal
)
Size Definition.................................................................(Route: SIZ)
The system database allocates resources to manage the operation of an IP keyset
station based on the values entered in the KEYSET_IP field.
If insufficient resources have been allocated in Sizes, the entry must be increased or
the IP keysets will not operate. For more information, refer to Chapter 4, Size
Definition of the Program Interface Reference Manual .

IP_MEDIA_CHANNELS

KEYSETS_IP
(FlexSet-IP 280S, FlexIP SoftPhone (FLIPS), T207M, T208M,
T207M/NP, T208M/BL, and Sentinel I/II/Terminal/Pro)
Set these entries to accommodate the total number of IP keysets expected to be used
in the system. Ensure that the maximum number of IP keysets to be used in the system
is defined . If insufficient resources are allocated, the FlexSets will not initialize.
To add IP ports to a non-IP system, IP sizes must be updated and first initialization
performed.
Modifying the System Sizes initializes the entire system database, and requires the
re-entry of all database information.