SystemAir Geniox 10, User Manual, Page: 59 / 66

3060386 | Geniox Air Handling Unit - User Manual
ERW maintenance | 4-6
Media Cleaning
Due to their inner laminar flow and self-cleaning feature, the I4 wheels are resistant to dust build-ups. As no particle will accumulate
inside the media, only the edges need to be cleaned.
If the wheel application is such that cleaning is needed, a vacuum cleaner with soft brush tip and compressed air with a flat nozzle
blowgun (70 psi) is recommended to clean both sides of the media.
As a last step, a microfiber humid cloth can be used to wipe the surface of the wheel.
It is not recommended to use any type of solvent or detergent on the energy recovery wheel.
Following months
Service Start-up 1 2 3 4 5 6 7 8 9 10 11 12
Wheel bearing lubrication
• •
Bearing bolt tightness
• •
Driving belt tension and wear*
• • • • •
AirLoop seals adjustment
• • • • • •
4.5 Recommended Maintenance Schedule
Caution
While cleaning the wheel media, take care not to apply too much pressure to avoid damaging the wheel surface. It is not
recommended to use any type of solvent or detergent on the energy recovery wheel.
*Following any driving belt adjustments, the belt should be verified again after a month and every year thereafter.
Following the service schedule above and keeping close records on your energy recovery wheel will insure trouble-free operation for
years to come. To keep your warranty in effect these services are required. This should be kept up-to-date during the warranty period.