SystemAir Geniox 10, User Manual, Page: 21 / 66

3060386 | Geniox Air Handling Unit - User Manual
Note: Never place the strap on the vertical profile too close to a corner, because the plastic corners and the profiles are not reinforced
for the heavy load and stress created by the tensioner when a section is pulled along the base frame or on the floor.
Place the strap on the bottom profiles of the unit to avoid any
load and stress on the vertical profiles when sections are pulled
together along the base frame. The sections must be pulled
together with the strap placed on the bottom profiles. Do not
pull and slide a section unless the strap is placed on the bottom
profile.
When the sections are pulled together, it may be helpful to place
the strap halfway up on the unit in order to press the sections
together to achieve a seal between the sections. Only gentle
tension is allowed because the vertical profiles are not reinforced
for stress in this direction and may bend.
Instruction for unloading on the site as well as installation and connection | 15