SystemAir Geniox 10, User Manual, Page: 45 / 66

3060386 | Geniox Air Handling Unit - User Manual
Adjustment and maintenance operations | 39
Place the self-adhesive strip on one vertical side of the filter fame
Check that the end of the strip is fully even with the horizontal
side of the filter frame.
Remove excess of the strip. The end of the strip must be fully
even with the horizontal side of the filter frame.
Push the filters carefully in the U-profile to be sure that there
are no leakages between the filters. Check that the vertical side
of the last filter in the U-profile is fully even with the end of the
U-profile. If the end of the last filter is not fully even with the end
of the U-profile an additional self-adhesive profile must be added
to avoid any gap between the rubber profile on the inspection
door and the last filter.