SystemAir Combi Unit Genius, Installation, Operation And Maintenance Instructions

Page: 17 / 124

5 Transport and Storage
Systemair delivers the combi unit with the basic/hot water, heat pump and ventilation module as a complete unit.
WARNING
Impacts and crushing
The ventilation module is not fixed to the base module with bolts. At a gradient of >30° from the vertical position, the
ventilation unit can tip, slip and fall down.
» Do not tilt the unit more than max. 30° from the vertical position!
» Secure the combi unit against tipping!
» Wear a protective helmet during transport!
WARNING
Damage to the combi-unit!
The ventilation module is only resting (not fixed in place) on top of the base and heat pump module.
» Transport the units in the packaging and mounted on the pallet (if possible)!
» Transport the unit with the help of several persons!
» Use only suitable handling equipment.
» Position the unit only on a level ground!
WARNING
Damage to the hydraulic connections!
The hydraulic connections can tear.
» Do not transport the combi unit by the hydraulic connections.
Transportation notes
"
Loosen the combi unit for transport only from the pallet if the conditions make it appropriate!
"
Transport the combi unit in the original packaging, upright and without water content.
"
The combi unit can be tilted for a short period of time up to 30° for transport through doors, stairs etc.
Storage
"
Store the combi unit in the original packaging, upright and without water content.
Storage location: On a dry, frost-free place and on a flat surface.
6 Assembly
6.1 Safety Information
WARNING
Risk of injury and risk of damage to the combi unit!
The ventilation module is only placed on the basic / heat pump module and can slide out and cause injury.
» Secure the combi unit against tipping!
» Install the combi unit only on a level ground!
17
Genius - V 1.0
Transport and Storage