deltawaveC-P
User manual
systec Controls Mess- und Regeltechnik GmbH 92/139
www.systec-controls.de
The relay has a NO (normally open) contact. The contact is
only closed when triggered by a parameterized function. The
contact will retain its open state on power failure and with
low rechargeable battery. You do not have to observe the
polarity of the wiring since it is potential free.
How to access the "Analog output" menu:
In the primary measuring window "Flow 1":
Select "SETUP" -> "CMPL
SETUP". In the main menu, select -> "I/O Setup" -> "Relay:
Choose value (lower limit) for activation of relay. Relay will be activated
when measured value fall below the limit.
In addition to parameterized variables such as flow, your
deltawaveC-P applies the corresponding unit that is
selected in the "Units Setup" setting and appended to the
respective variable that is displayed in a measuring