deltawaveC-P
User manual
systec Controls Mess- und Regeltechnik GmbH 63/139
www.systec-controls.de
8.7. Heat measurement
The integrated heat measurement function enables you to determine the
heat and cooling flow in your application using PT100 temperature sensors.
8.7.1. Introduction
The PT100 no.1 is installed in the warmer, while PT100 no. 2 is installed on
the cooler section of the circuit (The PT100 are numbered on the cable).
You can position the ultrasonic transducers at the warmer or colder section.
However, you are well advised to install the transducers in the cooler
section, as it is unlikely that they will be operated beyond their permissible
temperature limit in these sections.
deltawaveC-P displays the thermal output and the accumulated heat
quantity