deltawaveC-P
User manual
systec Controls Mess- und Regeltechnik GmbH 32/139
www.systec-controls.de
Picture 11 Preferable mounting positions for ultrasonic transducers (2)
deltawaveC-P uses the cross section of the pipe to calculate the flow. The
cross section is calculated from the parameterized inner diameter (user
setting). If you have sedimentation in your pipe which decreases the real
inner diameter you might get a (usually very small) uncertainty. Same
happens when inner diameter is not known / estimated.
If you usually want to measure pipes with unknown /
undocumented wall thicknesses we would recommend to use a
wall thickness gauge to precesily measure the wall thickness.
systec is offering the wall thickness gauge deltawaveC-P-WD.
Please ask you systec dealer for further information or visit us at
www.systec-controls.de
π
α
⋅
⋅
⋅
⋅
−
=
4
cos
2
2
1
)
1
2
(
2
D
T
T
T
T
L
Q