deltawaveC-P
User manual
systec Controls Mess- und Regeltechnik GmbH 33/139
www.systec-controls.de
7.2.3. Ultrasonic transducers on non-planar surface
You should never mount the transducers on non-planar surfaces such as
welding seams or deformations. You should always try to remove thick and
uneven protective paint coating from the piping area where the ultrasonic
transducers are to be mounted
7.3.
Mounting ultrasonic transducers
This chapter informs you of the options for mounting the ultrasonic
transducers. The V-mode is standard for most applications.
7.3.1. V-Mode
Transducer 1 Transducer 2
Picture 12 Mounting of transducers in V-mode
In the so-called V-mode, both ultrasonic transducers are mounted onto the
same side of the pipe. This mode is the standard for small and medium
pipe dimensions. The ultrasonic signals are reflected from the pipe wall.