deltawaveC-P
User manual
systec Controls Mess- und Regeltechnik GmbH 50/139
www.systec-controls.de
8.4.4. Mounting in V-mode or W-mode
Once you have completed parameterization of the measuring point the flow
transmitter displays the distance between the transducers in mm (face to
face, see
Picture 22
) units and as number of grid holes for use of the spacer
bar (ultrasonic transducers type F10 and F20). Grid number 5, for example,
is equivalent to
the number of grid holes between the ultrasonic
transducers, plus the position at which the knurled screw of the
opposing transducer has to be mounted
. Install the transducers on the
spacer bar as shown in the figure. Secure the transducers on the spacer
bar using the knurled screws (B).
1 2 3 4 5 Example:
Grid number 5
If the wrong space bar (short or long) is applied, the measurement
fails or the measurement will have wrong values.
Knurled screw (B)