background image

Installation Instructions

 

   

57

 

 

SK-NET TR/PCI (+) (SK-459x) 

Token Ring PCI NIC

A

PPENDIX  

D. L

ICENSE

AND 

W

ARRANTY

C

ONTRACTS

G

REAT 

B

RITAIN AND 

I

RELAND

Dear Customer,

If you acquired your SysKonnect product in ENGLAND, SCOTLAND, WALES or IRELAND, the following license and
purchase agreement applies to you:

This is a legal agreement between you, the end user and SysKonnect,  a business unit of Schneider & Koch & Co.
Datensysteme GmbH, incorporated in Ettlingen/Federal Republic of Germany (SysKonnect).

SysKonnect License and Purchase Agreement

By opening the sealed disk package and taking possession of the hardware, you are agreeing to be bound by the
terms of this Agreement. 
If you do not agree to the terms of this Agreement, promptly return the unopened and unused
disk package and hardware with the accompanying items (including all written materials and other accessories) to the place
of purchase for a full refund.

1. Grant of Software License

This SysKonnect License Agreement (License) permits you to use one copy of the SysKonnect software product acquired
with this License ("SOFTWARE") on any single computer, provided the SOFTWARE is in use on only one computer at
any time. If you have multiple Licenses for the SOFTWARE, then at any time, you may have as many copies of the
SOFTWARE in use as you have Licenses. The SOFTWARE is "in use" on a computer when it is loaded into the temporary
memory (i.e. RAM) or installed into the permanent memory (e.g. hard disk or other storage device) of that computer, except
that a copy installed on a network server for the sole purpose of distribution to other computers is not "in use". If the
anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses, then you must have a
reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does
not exceed the number of Licenses. If the SOFTWARE is permanently installed on the hard disk or other storage device of a

Summary of Contents for SK-4590






































































Reviews: