• NAT traversal Settings:
- Enable:
When enabled, the Network Transmitters attempt to configure port mapping in
a NAT router on your network, using UPnP. Note that UPnP must be enabled in the
network camera. (Please see Setup > System > Network > UPnP, on “4.5.5 System >
4) Network >
④
UPnP”.).
* Automatic setting:
The network camera automatically searches for NAT routers on
your network.
* Manual setting:
Select this option to manually select a NAT router and enter the
external port number for the router in the field provided.
Notes:
- If you attempt to manually enter a port that is already in use, an alert message will be
displayed.
- When the port is selected automatically it is displayed in this field. To change this enter a
new port number and click Save.
⑦
Zeroconfig
Zeroconfig allows the network camera to create and assign the IP address for network
cameras and connect to a network automatically.
Zero configuration networking (zeroconf) is a set of techniques that automatically creates
a usable Internet Protocol (IP) network without manual operator intervention or special
configuration servers.
Zero configuration networking allows devices such as computers and printers to connect
to a network automatically. Without zeroconf, a network administrator must set up services,
such as Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS),
or configure each computer's network settings manually, which may be difficult and time-
consuming.
65
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
