③
RTP
Users can configure settings for sending and receiving audio or video on a real-time basis.
These settings are the IP address, port number, and Time-To-Live value to use for the
media stream(s) in multicast H.264 format. Only certain IP addresses and port numbers
should be used for multicast streams.
• Port Range:
- Start port:
Enter a value between 1024 and 65532.
• Multicast:
This function is for sending Video and Audio to Multicast group.
- Enable Multicast:
Check the box to enable multicast operation.
- Multicast destination IP:
Enter an IP between 224.0.0.0 and 239.255.255.255.
Although it is empty, an IP will be entered automatically.
- RTP port:
Enter a value between 1024 and 65532.
- RTP TTL:
Enter a value between 1 and 255. If the network status is smooth, enter a
lower value. On the other hand, if the network status is poor, enter a higher value.
When there are many network cameras or users, a higher value may cause a heavy
load to the network. For a detailed explanation, please consult with a network
manager.
61
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
