Syscom Video MINITRAX3IP, User Manual

Page: 28 / 83

3.12 Dome Setup
CONFIGURATION MENU
LANGUAGE : ENGLISH
HOME FUNCTION SETUP
OSD DISPLAY
VIEW ANGLE SETUP
INITIALIZE DATA
ORIGIN OFFSET
DOME RESET
SYSTEM MENU
SYSTEM INFORMATION
SAVE AND EXIT(ESC TO CANCEL)
• LANGUAGE SETUP
LANGUAGE : Select the desired language.
• HOME FUNCTION SETUP
HOME FUNCTION SETUP
HOME FUNCTION : NONE
FUNCTION NUMBER : ---
WAITING TIME : 120 SEC
FUNCTION ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
HOME FUNCTION : None / Tour / Pattern / Auto Scan / Preset
FUNCTION NUMBER : - - -
WAITING TIME : 10 ~ 240 seconds
FUNCTION ENABLE : ON / OFF
The Home function can be set so that the camera automatically goes to Tour, Pattern,
Auto Scan or Preset after the keyboard controller has been idle for a specified amount of time.
For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.
Follow these steps to program the Home position:
1. Select “ HOME FUNCTION ” by pushing the Joystick to the left or right to scroll through the
None, Tour, Pattern, Auto Scan or Preset functions.
2. Select “ FUNCTION NUMBER ” and push the Joystick to the left or right. The recorded
function number will scroll.
3. Select “ WAITING TIME ” and push the Joystick to the left or right to select from 10 to 240
seconds.
4. Select “ FUNCTION ENABLE ” and turn to ON or OFF by pushing the Joystick to the left or
right.
22