Procedures to make an audio file in G.711 format for Audio Alert follow.
1. Connect the microphone in your PC.
2. Click the Capture button and talk into the microphone to record the audio or voice.
You can record up to 30 seconds. Click the Stop button to stop capturing.
3. Click the Save button and then set the file name to save a current capture file with PCM
format.
If you don’t need to make any PCM file, skip this step and go to the step 5 directly.
4. Click the Open button and then select the file name to open an audio file in PCM format.
5. Click the Encode button to encode a current audio file to G.711 format for Audio Alert.
Set the file name and encode parameters.
Caution:
All parameters must be synchronized with the ones in Audio setting page of
network devices for proper operation.
⑦
PTZ Preset
When the Network Transmitter detects an event, you can make a PTZ camera connected
to its RS485 port move to a predefined preset position. Check the box to enable the
service and return to the Home position once the event has ended.
51
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
