• Audio Alert Setting:
To use the audio alert with the Network Camera, an audio data file made by the user
must be uploaded from your PC. Provide the path to the file directly, or use the Browse
button to locate it. Then click the Upload button.
An audio file for Audio Alert can be made by Audio Recorder tool in the NCTitanium
software.
• Audio Alert Test:
When the setup is complete, the audio output can be tested by clicking the Test button.
To remove an audio file, select index and click the Remove button.
Note:
For the proper operation of Audio Alert, you must enable “full duplex” on the Audio
setting page.
⑥
Audio Recorder
To use the Audio Recorder tool to make an audio file for the Audio Alert function,
NCTitanium must first be installed from the installation CD.
After the NCTitanium program (Start > All Programs > NCTitanium > Tools > ARecorder) is
installed in your PC, the ARecorder window will display as below.
The description of each button in the ARecorder window follows.
Open:
Open an audio file.
Capture:
Capture audio from the microphone in your PC.
Save:
Save a captured file to your PC. (PCM format)
Encode:
Encode a current capture file or opened PCM file to G.711 file for Audio Alert.
Play:
Play a current audio file.
Stop:
Stop playing audio.
50
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
