• Motion Detection Setting:
The behavior for each window is defined by adjusting the Threshold and Sensitivity, as
described below.
A motion index is a set of parameters describing Window Name, Type, Threshold,
Sensitivity, and Dwell Time. Window Types is one of Motion and Mask windows.
- Threshold:
Sets up the threshold for the motion detection.
- Sensitivity:
Sets up the sensitivity for the motion detection.
- Dwell Time:
Sets the hold time an event lasts for the specified hold time from the point
of detection of a motion.
You can also modify or delete a motion index. Select an index and then, click the Modify
or Delete button.
Select “Enable” to activate the motion window.
Note: Motion event could occur by the movement of manual control & function
operation.
⑤
Network Loss
This is used to trigger the event every time the network connection fails.
Select “Enable” to activate the Network Loss event.
45
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
