2.6 IP Assignment
When the dome camera, encoder or decoder is first connected to the network it has no IP
address. So, it is necessary to allocate an IP address to the device with the “SmartManager”
utility on the CD.
1. Connect the dome camera/device to the network and power up.
2. Start SmartManager utility (Start > All programs > SmartManager > SmartManager). The main
window will display, and after a short while any network devices connected to the network will
be displayed in the list.
3. Select the dome camera on the list and click right button of the mouse.
You can see the pop-up menu as below.
4. Select Assign IP Address. The Assign IP window will display. Enter the required IP address.
Note:
For more information, refer to the SmartManager User’s Manual.
7
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
