• DNS Configuration:
DNS (Domain Name Service) provides the translation of host names to IP addresses on
your network.
- Obtain DNS Server via DHCP:
Automatically use the DNS server settings provided by
the DHCP server. Click the View button to see the current settings.
-
Use the following DNS server address to enter the desired DNS server by specifying
the following:
* Domain name:
enter the domain(s) to search for the host name used by the
network camera. Multiple domains can be separated by semicolons (;). The host
name is always the first part of a Fully Qualified Domain Name, for example,
myserver is the host name in the Fully Qualified Domain Name
myserver.mycompany.com where mycompany.com is the Domain name.
*
DNS servers:
enter the IP addresses of the primary and secondary DNS servers.
• Host Name Configuration:
- Host Name:
enter the host name to be used as device information in the client
software or SmartManager.
• Services:
- HTTP port:
Enter a port to receive a service through the HTTP. Default Port Number is ‘80’.
- RTSP port:
Enter a port to receive a service through the RTSP. Default Port Number is ‘7070’.
- PTZ port:
Enter a port to control the Pan/Tilt/Zoom. Default Port Number is ‘7000’.
• ARP/Ping Setting:
- Enable ARP/Ping setting of IP address:
The IP address can be set using the
ARP/Ping method, which associates the unit's MAC address with an IP address.
Check this box to enable the service. Leave disabled to prevent unintentional
resetting of the IP address.
59
Summary of Contents for MINITRAX3IP
Page 80: ...Figure Dimension 74 ...
