Syscom Video HD CUBE CAMERA Instruction Manual Download Page 9

Page: 9 / 76

• Rear View

Name

Description

PIR Sensor

NCT-2211/NCT-2221 is equipped with a PIR Sensor that has a maximum
range of 5 meters for detecting movement in the dark.

Microphone/Speaker

NCT-2211/NCT-2221 is equipped with a Microphone and Speaker. Two-
way audio support allows for remote users to listen in on an area and
communicate with visitors or intruders.

Light

NCT-2211/NCT-2221 is equipped with White LED that illuminates the
scene.

Network Connector

Ethernet, RJ-45 port compatible with 10/100Mbps having PoE functionality.
Modular Jack

Power Connector

For connection of the 5V power adapter (included).

Reset Button

Press and hold the Reset Button for one second using a paper clip or thin
object. Wait for the camera to reboot.

WPS Button

WPS(Wi-Fi Protected Setup) Button, it finds and connects a wireless AP
device automatically.

Network LED (Green)

Steady for connection to a 100Mbit/s network. Flashes for network
activity.

Power LED (Green)

Steady green for normal operation or booting.
Flashes green during firmware upgrade.

Status LED (Red)

Steady red for failed upgrade or booting.



Camera Dimension

See the diagrams below for the exact dimension of the NCT-22x1, IR Bullet network cameras.

Dimensions

Unit:

Summary of Contents for HD CUBE CAMERA













































































Search results

Summary of Contents for HD CUBE CAMERA

Reviews:

Related manuals for HD CUBE CAMERA

Brands by name

Popular brands

Syscom Video HD CUBE CAMERA, Instruction Manual

Search results

Summary of Contents for HD CUBE CAMERA

Reviews:

Related manuals for HD CUBE CAMERA

Brands by name

Popular brands