Wireless(NCT-2211 only)
Wireless settings in the NCT-2211 must be the same as the access point or ad-hoc device. When
changing the settings, they should always be made first in the camera and then in the wireless access
point. This ensures that the camera is always accessible when making changes.
•
Network Select
This list is the result of a network scan. Access points with a disabled SSID Broadcast will not
appear unless the camera is linked to it. The network camera is currently linked to is shown in
blue. A network using unsupported security is shown in grey. The following information is
provided:
- SSID:
The name of a wireless network (or ad-hoc device). If the same name occurs several
times this means that several access points for that network were found. The camera cannot
be configured to only associate with one particular access point.
- Security:
Shows which type of security the network uses. See below for the security types
supported by the camera.
-
Signal Level: Shows the signal strength.
65
