Syscom Video HD CUBE CAMERA Instruction Manual Download Page 71

Page: 71 / 76

3.8 Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in “3.5.4 System > Maintenance”) or use the Reset button on the network
camera, as described below:

• Using the Reset Button

Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.

1. Switch off the Network Camera by disconnecting the power adapter.

2. Press and hold the Reset button with a straightened paperclip while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds.

4. Release the Reset button, and wait for the Status LED to turn off.

5. The network

camera

resets to factory defaults and restarts after completing the factory

reset.

Caution: When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.30.220)

Summary of Contents for HD CUBE CAMERA













































































Search results

Summary of Contents for HD CUBE CAMERA

Reviews:

Related manuals for HD CUBE CAMERA

Brands by name

Popular brands

Syscom Video HD CUBE CAMERA, Instruction Manual

Search results

Summary of Contents for HD CUBE CAMERA

Reviews:

Related manuals for HD CUBE CAMERA

Brands by name

Popular brands