Installation and commissioning
5.3 Installation of the connection set for heating water conditioning
The connection set is available as optional accessory (serial no. 3200.00.935).
►
Connect the connection set for heating water conditioning to the reinforced
hoses as follows:
Fig. 10:
Fit the connection set
►
Connect the hose marked “OUT” on the cover with the connecting piece
marked “IN” on the connection plug of the HVA .
►
Connect the hose marked “IN” on the cover with the connecting piece marked
“OUT” on the connection plug of the HVA.
Attention!
Improper installation may cause material damage!
►
When using a 14 or 30 liter cartridge, remove the strainer from
the connection set (in the connection cover). These cartridges
are equipped with a segment ring screw connection with strai-
ner, which is why the strainer is not required in the connection
set.
Note:
Cartridges come in
four sizes: 4, 7, 14 or
30 liters.
The 4 and 7 liter
cartridges must be
attached on-site (e.g.
to the wall).
14 and 30 liter
cartridges must be
secured such as to
make sure they cannot
fall during the filling
process.
18
