Backup Deletion
Interval
The validity of a backup file in the database (i.e. how soon will a backup file in the
database be deleted), calculated by day, with the default value of 7. Range of
value: 1~10.
Enable External
Interface
Sets whether to open the database for secondary development. The default
value is
No
.
External Interface
Account
Username for accessing the database through an external interface. If the
configuration item
Enable External Interface
is set to
Yes
, this configuration
item should not be left empty.
Password
Password for accessing the database through an external interface. If the
configuration item
Enable External Interface
is set to
Yes
, this configuration
item should not be left empty.
Permitted Access
to External
Interface
IP address of the external interface which is permitted to access the database.
To set multiple IP addresses, separate them by ‘,’. This configuration item set to
‘*’ means all addresses are permitted to visit the database.
After configuration, click
Save
to save the above settings; click
Reset
to restore the
configurations.
3.10.2 Database Restore
Figure 3-50 Database Restore Interface
Database Restore
interface. The above list shows the time point of the
database backup. To restore the database to a designated backup, tick the checkbox before the
corresponding time point and click the
Restore
button. Note that only one time point can be
selected for your restoration; otherwise, it may report error. Clicking
Reset
can cancel the current
selection of the time point but cannot cancel the operation of
Restore
.
To delete the database backup, tick the checkbox before the corresponding time point in Figure
3-50 and click the
Delete
button.
Check All
means to select all available items on the current
page;
Uncheck All
means to cancel all the selections on the current page.
3.11 Centralized Management
Figure 3-51 Centralized Management
Centralized Management
provides an access for administrator to manage all slave devices in
the network via a master device. In the network, the number of master devices is limited to one,
but that of slaver devices is unlimited.
Centralized Management
includes two parts:
Management
and
Master/Slave Settings
. See Figure 3-51. The
Management
interface, open to
ATP2410 User Manual (Version 4.0.0.0)
Page 44
