Backup Path
The path for auto backup of the recording data (read-only).
Time Condition to
Delete a Backup File
Time limit for the backup file, calculated by s, with the default value of 36000. After
the expiration, the file will be deleted automatically.
On the storage configuration interface shown in Figure 3-20, the FTP feature can also be set to
ensure the stability of the file backup. The table below explains the corresponding items.
Item
Description
FTP Upload
Sets whether to upload recording files to a designated FTP.
Connection Test
Sends a test file to the designated FTP to make sure recording files can be properly
uploaded to it
FTP Address&Port
FTP address and port number. This item should be filled out in the format:
FTP
address: port number
.
Storage Path
The location of the recording file saved to the designated FTP. It must be a path
already existing on the FTP.
Username,
Password
Username and password for the designated FTP, having the access and file upload
authority
After configuration, click
Save
to save the above settings into the database; click
Reset
to restore
the configurations. The settings will not go into effect until you reboot the recording service. For
the instructions about rebooting the recording server through WEB, refer to
3.4.3 Number
Figure 3-21 Number Setting Interface
See Figure 3-21 for the number setting interface. The list in the above figure shows the operations
for different incoming calls, including recording, regarding it as area code, regarding it as prefix
number and popping up display. The numbers and corresponding information can be added by
the
Add New
button on the top right corner. See Figure 3-22 for the number adding interface.
ATP2410 User Manual (Version 4.0.0.0)
Page 22
