Syntec 70SB, Manual

Page: 44 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Troubleshooting Q&A – 44
1.
2.
3.
a.
b.
c.
Confirm whether
the expansion
parameter value
3402 (R82) is
changed to the
corresponding
value of the laser
source of each
factory
Confirm whether
the laser warning
value (R52)
corresponds to the
normal value of the
laser source of each
factory
Confirm whether
the operation mode
value (R17008)
corresponds to the
controller or PC
mode
Confirm if
the binary
value of the
laser O point
(R53)
includes the
sum of the
normal laser
alarm and
the laser
power
Controller
hardware
failure
Verify in
Register
whether the
R17110 laser
energy
command
outputs 0 or
255, and if
so, use a
meter to
verify if the
correspondi
ng pin
outputs a
normal V
value