Syntec 70SB, Manual

Page: 46 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Troubleshooting Q&A – 46
11.4 Poor marking
Problem Figur
e Possible cause Elimination method
Marking size not
accurate 1. Focal length
position error
2. Calibration table
error
1. Adjust the focal length
to correct position
2. Adjust the calibration
table scale zoom
11.5 Visual problem
Problem Figur
e Possible cause Elimination method
Vision and laser
axis are not
coaxial Assembly error
in mirror
mechanism Open the reflector cover
and adjust the angle of
the reflector
spectroscope. The PC
visual software
interface can be used to
observe whether the
marking result has a
cross-hair cursor for the
lens.