Syntec 70SB, Manual

Page: 23 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Operation of marking – 23
STEP4: Turn the laser on manually - press to turn on the laser. Press to turn off the laser.
With a laser light sensor card or black paper, if there is a bright spot on the sensor card, or if
the black paper has a laser processing mark up and down, you can confirm that the laser light
is normal.
8.2 Marking test
The following is simply to verify whether the marking function is OK. Please refer to the operation
manual of laser marking PC software for detailed marking software operation.
STEP1: Open marking software
STEP2: The above key list produces processing patterns, like single-line, contour, barcode,
image, DXF, and basic geometry, which are available for selection.