Section II
General Product Information
006-0006715 10/31/18
Rev J
7 of 44
MPS-MPPS-4000 Guide
www.synqor.com
Product Topology: MPS
The SynQor MPS‑4000 Series products use an isolated topology that provides protection to
the load from spikes, noise, surges, brownouts, blackouts, etc. in the input power sources.
They also provide smoothing of load transients and nonlinear load profiles so that the input
power source is not subjected to these disturbances.
EMI filters are present at all external inputs and outputs
AC
INPUT
MAIN
DC
OUTPUT
AC to DC
w/ PFC
and
ISOLATION
OUTPUT
FILTERING
OUTPUT
CAPACITOR
INTERFACE
CONTROL
Power flows from the AC INPUT through an AC‑DC converter that has Power Factor Correction
(PFC) and high‑frequency safety isolation.
The DC outputs at various voltage and power levels are available. The DC can deliver up to
4000 W (5250 W transient) output.
Bulk energy storage capacitors are connected to the mid-bus to help smooth imbalances in
power flow between the inputs and outputs of the MPS.
There is a communication/control port that provides a digital interface to a host computer system.
