the delay time via the modulation matrix, useful to
obtain special effects.
Low Cut
The echoes can be processed by a 6 dB/oct lowpass fil-
ter, making each subsequent echo darker. Set to zero,
the lowpass filter is disabled.
High Cut
The echoes can be processed by a 6 dB/oct highpass
filter, making each subsequent echo brighter than the
previous one. Set to zero, the highpass filter is dis-
abled.
Width
By default, all delay programs operate in full stereo.
When using the ping-pong delay, for instance, the gen-
erated echoes will alternate between the left and right
speakers, with no signal in the center. If this effect
feels too strong, the width knob can reduce the stereo
image, all the way down to mono.
Feedbk
The feedback parameter adjusts how long the echoes
are repeated. The percentage specifies the level change
from one echo to the next, so 100% creates an infinite
series of echoes, 50% cuts the level of each subsequent
echo in half etc.
Mod-Rate
All delay programs allow to modulate the delay time
with a LFO. The modulation rate parameter adjusts
the LFO rate in Hertz (Hz).
Mod-Amt
The amount knob adjusts the modulation depth. Set
to zero, no modulation takes place, the echoes sound
rather static. Small modulation amounts cause the
delay to sound slightly more organic, as the delay con-
stantly varies a little over time.
Large modulation
amounts cause a noticeable strong pitch modulation,
which can be used for special effects.
Dry/Wet
Blends between the dry and processed signal.
4.14.7 Reverb
A reverb effect is used to create the illusion of a sound
being played back in a spatial environment such as a
52
DUNE 2 User’s Manual
Summary of Contents for DUNE 2
Page 1: ...User s Manual...
