Osc Amount
Modifies the amount parameter (located next to "Den-
sity" on the top left). Oscillator density must be higher
than 1 for this to work.
Osc Spread
Modifies the spread parameter.
Oscillator density
must be higher than 1 for this to work.
Osc VA Pulse Width
When the oscillator is set to "Pulse" in VA mode, this
parameter changes the pulse width.
Osc VA Sync Freq
When the oscillator is set to VA mode with Sync en-
abled, this parameter changes the synchronisation fre-
quency.
Osc WT Position
When the oscillator is set to WT mode, this parame-
ter sets the Wavetable position. This allows to sweep
through the wavetable by applying a LFO or MSEG.
Osc FM Amt A
When the oscillator is set to FM mode, this changes
the amount of operator A.
Osc FM Amt B
When the oscillator is set to FM mode, this changes
the amount of operator B.
Osc FM Amt C
When the oscillator is set to FM mode, this changes
the amount of operator C.
Osc FM Feedbk
When the oscillator is set to FM mode, this changes
the amount of operator feedback.
5.3.3 Ring mod/Noise
Ring Mod Volume
Adjusts the mixer volume of the ring modulator.
Ring Mod Pan
Adjusts the mixer panorama position of the ring mod-
ulator.
65
DUNE 2 User’s Manual
Summary of Contents for DUNE 2
Page 1: ...User s Manual...
