Filter FX LP Cutoff
Most filter effects (esp. distortion), are followed by a
low-pass filter to roll off unwanted high frequencies.
This destination allows you to modulate this parame-
ter. The slope of the low-pass filter is 12 dB, making it
steep enough to be useful as a second filter, in addition
to the main filter.
Filter Attack, Decay, Sustain, Release
Adjusts the filter envelope parameters relative to
whatever is set on the front panel. This allows you
to specify different filter envelopes for different voices
or to dynamically vary those parameters for each note.
5.3.5 Amplifier
This section describes the amplifier destinations.
Amp Attack, Decay, Sustain, Release
Adjusts the amplitude envelope parameters relative to
whatever is set on the front panel. This allows you
to specify different amplitude envelopes for different
voices or to dynamically vary those parameters for
each note.
Amp Level
Adjusts the amplitude envelope level.
Amp Pan
Adjusts the panorama position of the amplitude enve-
lope. This parameter has no corresponding knob on
the front panel; it allows you to control the panorama
of the entire voice.
5.3.6 MSEG
This section describes the available destinations for the
graphical envelopes, MSEG 1-4.
MSEG Rate
Adjusts the rate of the MSEG. Note that MSEG Sync
must be turned off for rate modulation to work.
5.3.7 LFO
This section describes the available destinations for
low frequency oscillators 1-3.
LFO Amount
Adjusts the amount of the specified LFO.
67
DUNE 2 User’s Manual
Summary of Contents for DUNE 2
Page 1: ...User s Manual...
